LA BELLE CR

Art. No. 5882
Characteristics and sound properties

As the most compact member of the La Belle family, the La Belle CR is equipped with the same tweeter and mid-range drivers as its bigger sisters La Belle and La Belle Center, but does without the woofers found in those larger arrangements. As regards its appearance, the La Belle CR is obviously based on the La Belle. The objective of the development was to produce rear speaker that can also be used as a smaller centre speaker.

In order to achieve a reasonable lower limiting frequency for use with a surround system, the cabinet was designed to be just big enough to house the B 200 - 6 Ohm above 67 Hz while keeping the loudspeaker cabinet as compact as possible. Although this may appear to be a contradiction in terms, the parameters of the B 200 - 6 Ohm allow this idea to be put into practice, which enables the La Belle CR to be easily integrated in a surround system in conjunction with large main speakers and subwoofers. Even if used as a simple pair of stereo speakers, they will cut a good figure.

The low-frequency range is subjected to linearising and high-pass filtering by the serial capacitor. Nevertheless, we recommend including a high-pass filter on the surround amp (small mode), which will enable much improved bass management. Since it does not have to cope with the lower frequencies, the La Belle CR is well able to keep up with the larger family members at the top end of the volume scale.

At the same time, it has been possible to retain the inimitable soundquality and range of detail found throughout the La Belle family, which allows the harmonious surround effect to be achieved through all the speakers at the highest level. The challenge of reproducing the finest acoustic details provided by the source of the sound at the volume levels typically encountered in film environments is met with remarkable accuracy, which results in many an astonished listener in the auditorium. This speaker is quite simply able to amaze.

Component parts list for 1 box

The kit includes all the components listed here but not the cabinet.

Tweeter
1 pc.
Waveguide
WG 220x150
1 pc.
Bass Midrange
1 pc.
Crossover
1 pc.
Terminal
1 pc.
Dampingmaterial
Polyesterwool
1 bag
Cylinder head screws
5 x 30 mm
6 pcs.
Round head screws
4 x 20 mm
4 pcs.
Countersunk screws
3.5 x 25 mm
10 pcs.
Cable
2 x 2.5 mm²
1.5 m

Technical Data

Rated power
40 W
Maximum power
70 W
Nominal impedance Z
6 Ohm
Übertragungsbereich (-10 dB)
67–25000 Hz
Mittlerer Schalldruckpegel
87 dB (1 W/1 m)
Trennfrequenz
2700 Hz
Gehäuseprinzip
geschlossen/ closed
Net volume
16.2 l
Außenmaß Höhe
478 mm
Außenmaß Breite
260 mm
Außenmaß Tiefe
204 mm

Frequency- and impedance response